Trimetric Meter Digital Monitor
For 12, 24 or 48 (see option for 48) volt systems, includes displays for Amp-Hours, Amps, Volts. Also includes some unique features not available on other AH meters: · Settings are not lost when power is disconnected. · AH can be reset manually, or when your programmed full charge settings are reached. · Charging / Reached Charge LED lights steady to indicate batteries are currently under charge and flashes when batteries have reached a full charge setpoints · Highly visible LED display can easily be turned off to save power. · Battery Reminders light can be set to remind customer when equalization or full charge is needed +/or when battery voltage is low. Uses standard 500A/50mV or 100A/100mV shunts (not included). Voltage is displayed to tenths of a volt. Amperage to above 500A, Amp-Hours are displayed to a maximum of 999,000. User settings for full charge parameters, amp-hour capacity, and charge efficiency.
| Model Number | Description | List Price |
|---|---|---|
| PRBETM2020 | Trimetric Meter for 12 or 24V Larger Display, AH in % | $175.00 |
| PRBE48 | Add-on for conversion to 48 V, includes surge protection | $29.00 |
| PRBEBOXTM2020 | Box for mounting the TM 2020 | $7.50 |
| PRDTSHNT100A | 100A/100mV Shunt | $25.00 |
| PRDTSHNT500A | 500A/50mV Shunt | $29.00 |
| WRBE183PR | 18 ga. 3 pair twisted cable (priced per foot) | $1.20 |
Trace Meter 500
Trace version of the Trimetric (listed above) displays volts 8-32V (up to 70V w/48V adapter), net amps, battery level lo-30-90%-full. Data monitoring of: Days since full, Cumulative Amp Hours Removed, Battery Highest Volts, Battery Lowest Volts. Comes with plastic surface mount box. Shunt assembly includes fuse assembly, and RJ6 phone plug connector with 50' cable which snaps in to meter. A second plug connector operates a remote on off switch for your inverter. Packaged in attractive clamshell case. Dimensions 4.6"H x 4.6"W x 1.8"D. Weight 3 Lbs.
| Model Number | Description | List Price |
|---|---|---|
| PRTETM500 | 12-24VDC Digital Volt, Amp, Amp-Hour Meter w/ Shunt Assembly | $345.00 |
| PRTETM500NS | 12-24 VDC Digital Volt, Amp, amp-Hour Meter, no shunt | $215.00 |
| PRBE48 | 48V adapter for Trimetric | $29.00 |
Brand Electronics
The Model 20-CTR is designed to monitor the whole house load, inverter output, generator output, etc. The meter consists of an easy to install current transducer (CT) (2 for 2 phase 240Vac applications), a base module and an attractive oak trimmed panel mount display. The remote display can be mounted up to several hundred feet from the base module using inexpensive CAT5 LAN cable. The meter features both a "permanent" and resettable kW-hr and cost display, as well as watts, peak watts and cost information (similar to the Model 4 series). The meter can be configured for 120 or 120/240 operation and will monitor up to 9999 watts.
| Model Number | Description | List Price |
|---|---|---|
| PRBE20CTRAC | kWH Meter AC with transducer | $360.00 |
| PRBE20CTRAC2 | kWH Meter w/2 AC Trans for dual SW | $420.00 |