Suitable for Grid-Tied and Off-Grid Applications
Split phase 120/240 Vac output from a single inverter
Non-volatile flash memory
High efficiency: 95% peak
High surge capacity (double the inverter rating for 7 seconds)
Dual AC inputs (Gen & Grid)
Grid quality waveform - not a stepped approximation.
Power factor corrected battery charger increases efficient use
of AC charging sources. Back plate mounting system for ease
of installation.
Power Distribution Panel provides integrated switchgear for AC,
DC and communications wiring. Wiring is pre-connected, measured and labeled for field simplicity.
Easily configured for multiple inverter installations.
Allows up to 3 inverters and 4 charge controllers per system.
XW-MPPT60 New MPPT PV Charge Controller
Built-in PV Ground fault protection supports battery voltages
from 12 to 60VDC. Support array voltages up to 150 VDC maximum open circuit.
SCP System Control Panel provides access to control settings
and monitoring of all devices on a system network Xanbus
(standard Cat 5 cable) with no need for a hub or power cubes.
Display is 128 x 64 pixel backlit LCD screen with user friendly
menu system. The SCP comes with mounting plates for flush and
stand-off mounting. SCP can be removed once system is programmed.