3-stage PWM regulators with field selectable voltage settings. Calibrated scales and test points allow precise adjustment and verification. Electronic protection for short circuit, overload, overtemp, and reverse polarity. Two stage lightning and surge protection. Equalize mode has manual or automatic activation (every 30 days). Has diversion control mode for control of wind and hydro sources. Optional backlit LCD meter displays volts, amps, cumulative amp-hours of array and is mounted on the unit (when ordered together) or remotely with a telephone type cable. Optional remote temperature compensation probe. Operates as either a charge control, diversion control or a load control. Dim. 9"H x 5"W x 2"D. Wt 4lbs. Limited 2 year warranty.
| Voltage | Description |
|---|---|
| 12 or 24 | Controller 60amp, 3 stage |
| 12, 24 or 48 | 40A PV Charge Control |
| 12, 24 or 48 | LCD Meter: Amps, Volts & Array Amp-Hours |
| 12, 24 or 48 | Remote LCD Meter w/50 ft. wire |
| 12, 24 or 48 | Remote LCD Meter w/100 ft. wire |
| Battery Temperature Sensor for "C" Regulators and "DR" Inverters.(15' Wire) | |
| Battery Temperature Sensor for "C" Regulators and "DR" Inverters.(35' Wire) | |
Combination charge regulator, timer, and low voltage disconnect. Features include: 12 amp name plate current (16 amps NEC-type), 3 stage charge regulator with PWM for absorption and float stages, MOSFET design, self resetting overtemp protection, electronic short circuit and overload protection, two stage lightning and surge protection, tri-color LED system indicator, 12 amp low voltage disconnect with overload / short circuit protection with early warning for disconnect. All control setpoints are field adjustable with removable knobs, calibrated scales and testpoints for verification. Reverse polarity protected. Lighting load control is adjustable from 10 min. to all night (LVD protected). Power consumption 3-7mA. Optional external probe activates temperature compensation circuit. Packaged in outdoor rated enclosure with bottom, back and side wire entry through 1/2" conduit knockouts to terminal strip (up to AWG 10). ETL approved. Limited 2 year warranty.
| Description |
|---|
| 12V, 12A adjustable regulator, 12A adjustable LVD and lighting timer |
| Battery Temperature Sensor for "C" Regulators and "DR" Inverters.(15' Wire) |
| Battery Temperature Sensor for "C" Regulators and "DR" Inverters.(35' Wire) |